Nortel CallPilot Administrator's Manual page 70

Nortel callpilot: user guide
Hide thumbs Also See for CallPilot:
Table of Contents

Advertisement

70 Chapter 5 Using Directory Synchronization
4
5
Copyright © 2007, Nortel Networks
.
If no Directory Connection is defined, click on the Add
button. The Directory Connection screen appears. See
"Configuring Directory Connections" on
directory connections" (page
Configure Synchronization Profiles screen is retained.
To change any information in the selected Directory
Connection, click on the Modify button. The Directory
Connection screen appears. Edit the Directory Connection.
Information on the Configure Synchronization Profiles screen
is retained.
Select the Organizational Unit from the drop-down list: This is
the portion of the external directory that can be synchronized.
View the information under Mapping. There are default values
for some of the attributes. Check with the Active Directory
Administrator to ensure these attributes contain valid data. For
example, ensure that the user's phone numbers are stored under
the telephonenumber attribute, if it is not then select the correct
attribute.
Note: If the default values meet your requirements, proceed
to step 7.
CAUTION
Caution must be observed when mapping attributes.
Improper mapping can result in invalid mailbox information.
For example, if the department number is inadvertently
mapped to the given name, all given names could be
overwritten by their department numbers.
Select the link for the CallPilot attribute you want to map or un-map.
Result: The Attribute Mapping screen appears.
1. From the drop-down list, select the External Directory attribute
that you want to map from. If you want to remove the attribute
mapping, select not mapped.
2. Select the appropriate Transformation Rule. This is only
enabled for telephone numbers.
Example: Users' telephone numbers appear as 7 digit numbers,
for example 343-8858. If you want the CallPilot mailbox number
to be 8858, select "last 4 digits."
3. Click Save.
Nortel CallPilot
Administrator Guide
NN44200-601 01.11 Standard
5.0 9 November 2007
"To configure
66). Information on the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents