Changing Messaging Defaults; Nortel Callpilot; Administrator Guide; Nn44200-601 01.11 Standard - Nortel CallPilot Administrator's Manual

Changing messaging defaults

When you initially configure a CallPilot system, you can use the
preconfigured messaging defaults. As you administer the system, you might
need to change these defaults to accommodate
•
•
•
•
Changing default messaging limits and warnings
To prevent messaging data and traffic from exceeding system capacity,
configure mailbox limits for all mailbox owners. Use the Messaging
Management screen to configure the maximum delay for timed delivery,
storage limits and warnings, and system time-outs.
Maximum delay for timed delivery
Set the maximum number of days that message delivery can be delayed.
Default: 31 days Valid range: 0–365
Storage limits and warnings
Setting
Mailbox full warning
threshold
Maximum prompt size
Copyright © 2007, Nortel Networks
.
a very large number of mailbox owners
increased use of system resources
changes in default billing or revert DNs, or introduction of a name dialing
service
the need to set up a special-purpose mailbox to store
— faxes addressed to mailboxes that are not fax capable
— messages relating to network diagnostics (if messaging systems
are networked)
— messages generated by system alarms
Description
The percentage of total messages that a mailbox can
contain before the mailbox owner is given the mailbox
full warning prompt at logon.
Default: 85%
Mailbox storage limits apply to all CallPilot voice items.
Specify the number of minutes and seconds allowed for
user mailboxes, and specify the percentage at which
CallPilot generates a warning to delete voice items.
Default: 1 minute, 30 seconds
Valid range: 30 seconds–9 minutes, 59 seconds

Nortel CallPilot

Administrator Guide

NN44200-601 01.11 Standard

5.0 9 November 2007
Changing messaging defaults 143