Applying Rpls - Nortel CallPilot Administrator's Manual

Be cautious about the dialing codes you permit, and be careful about the features
to which you apply this less secure list.

Applying RPLs

RPLs must be applied to each of the following:
•
•
•
Guidelines for selecting the global RPL
The global RPL governs the call answering, express voice messaging, and
mailbox thru-dial sessions of all mailboxes on the system. Select an RPL
(such as the on switch RPL) that allows mailbox callers to dial out to internal
extensions only.
You can apply less restrictive rules for mailbox owners than for mailbox
callers by applying a different mailbox class RPL to the outdialing and
thru-dial feature in each mailbox class.
Guidelines for selecting mailbox class RPLs
To give different mailbox class members different outdialing permissions
for each outdialing feature, apply RPLs to features in each mailbox class.
Before you apply mailbox class RPLs to outdialing features in a mailbox
class:
•
•
•
•
•
•
Copyright © 2007, Nortel Networks
.
the entire system (the global RPL)
a mailbox class (a mailbox class RPL)
an individual application or service (an application-specific RPL)
Note: You can also create special-purpose RPLs.
Find the mailbox class members.
Consider the calling requirements of the members and the restrictions
needed for cost management and system security.
For each mailbox class, determine which outdialing features are needed
by mailbox owners in that class.
For features mailbox owners do not need, ensure all dialing codes are
restricted (digits 0–9 should be defined as the restriction codes).
Create an RPL that blocks all outdialing by specifying 0–9 as restriction
codes and no permission codes. Give the RPL a meaningful name,
such as Block all Outdialing.
For features mailbox owners require, decide on the appropriate dialing
restrictions and permissions for each feature. See "Guidelines for
creating and customizing RPLs for voice messaging features".
Nortel CallPilot
Administrator Guide
NN44200-601 01.11 Standard
5.0 9 November 2007
ATTENTION
Applying RPLs 121