Nortel CallPilot Administrator's Manual page 83

4
5
Copyright © 2007, Nortel Networks
.
•
If this is the first use of the Directory Synchronization extension,
the system displays a prompt and the Server drop-down list
displays <undefined>. To define the CallPilot server, follow these
steps:
a. Click on the Servers button.
Result: The CallPilot Servers dialog appears.
b. Click on the Edit button. The import and export button are
discussed later.
Result: The CallPilot Server Properties screen appears.
c. Enter the information in the appropriate fields. This information
is found in the Local CallPilot link on the Configure Directory
Connections screen in the CallPilot server.
d. Click on the Validate button.
Result: A dialog box appears indicating success or failure.
• If validation is unsuccessful, check the Directory
Synchronization configuration in the CallPilot server, and
correct the problem before continuing.
e. Click OK.
Result: The CallPilot Server appears in the CallPilot Servers
dialog box.
f. Click OK.
Result: The Create CallPilot User screen appears.
From the drop-down menus on the Create CallPilot User screen,
select the desired Server, Synchronization Profile, and Template.
Click on the Create button.
Note: You cannot create a new mailbox if the template includes
administrative rights.
Result: The user is created and linked. The Delete and Unlink
buttons are active. The user's address appears above the Create
button in the following format:
<SMTP\VPIM network shortcut><Mailbox>@<FQDN of the CallPilot
Server>
Nortel CallPilot
Administrator Guide
NN44200-601 01.11 Standard
5.0 9 November 2007
Using the Directory Synchronization Extension 83