Canon imageRUNNER ADVANCE C5255 Series Service Manual page 148

2
Technology > External Auxiliary System > Controls > Counter Control
Display code of each counter (in service mode)/Item
Target
Counter Counter Counter Counter
1 2 3 4
GER Total Total Total Total
model (Black/ (Black/ (Full (Full
type1 Large) Small) Color + Color +
Single Single
Color/ Color/
Large) Small)
112 113 122 123
GER Total 1 *1 *1 *1
model
101 0 0 0
type2
AMS Total Total Total Total
model (Black/ (Black/ (Full (Full
type1 Large) Small) Color + Color +
Single Single
Color/ Color/
Large) Small)
112 113 122 123
AMS Total 1 *1 *1 *1
model
101 0 0 0
type2
ITA Total Total Total Total
model (Black/ (Black/ (Full (Full
type1 Large) Small) Color + Color +
Single Single
Color/ Color/
Large) Small)
112 113 122 123
ITA Total 1 *1 *1 *1
model
101 0 0 0
Total
type2
2 Technology > External Auxiliary System > Controls > Counter Control
Country
Counter Counter Counter Counter
code
5 6 7 8
Scan Print *1 *1 DE
(Total 1) (Total 1)
501 301 0 0
*1 *1 *1 *1 DE
0 0 0 0
Scan Print *1 *1 ES / SE
(Total 1) (Total 1) / PT /
NO / DK
/ FI / PL
/ HU /
CZ / SI /
GR / EE
501 301 0 0
/ RU /
*1 *1 *1 *1
NL / SK
/ RO /
0 0 0 0
HR / BG
/ TR
Scan Print *1 *1 IT
(Total 1) (Total 1)
501 301 0 0
*1 *1 *1 *1 IT
0 0 0 0
T-2-68
<Code description>
• Large : Large size paper (if the width in paper feed direction is over 364mm/count up x1)
• Small: Small size paper (if the width in paper feed direction is 364mm or less)
• Total: All (C + P), count up x 1
• Duplex: At auto duplexing copy, count up x 1
• 3-digit code in counter column is the setting value of the following service mode items.
COPIER > OPTION > USER > COUNTER1 to 6
• Counter2 to 6 can be changed in service mode: COPIER > OPTION > USER.
*1: by default, not indicated; may be changed in service mode.
*2: if '0' is set for the following: COPIER > OPTION > USER > CNT-SW.
*3: if '1' is set for the following: COPIER > OPTION > USER > CNT-SW.
● Count-up timing
Count-up timing differs depending on the following conditions:
• Print mode (1-sided/ 2nd side of 2-sided/ 1st side of 2-sided)
• Delivery position (Finisher)
Delivery position 1-sided/ 2nd side of 2-sided
1 Host First Delivery Tray First Delivery Sensor (PS21)
Machine
Second Delivery Second Delivery Sensor (PS27)
Tray
Third Delivery Tray* Third Delivery Sensor (PS30)
2 When the Finisher is installed Finisher: Inlet Sensor (S1)
2-110
Print mode
1st side of 2-sided
Count-up timing
Duplex Paper Sensor (PS31)
T-2-69
2-110