Canon imageRUNNER ADVANCE C5255 Series Service Manual page 203

2
Technology > MEAP > Setting the method to login to SMS > Outline
4) Click [Start] or [Stop] button shown in Status field of SMS Installer Service (Password
Authentication) to check if the status is changed.
5) Logout once and login again to check to see that the setting is applied properly.
When clicking [Stop] to change the status to [Start], another password authentication login
screen is firstly shown. When trying to access the password authentication screen after
clicking [Start] to change the status to [Stop], the user is automatically redirected to RLS
authentication screen.
Password authentication started screen and Password authentication stopped screen
2 Technology > MEAP > Setting the method to login to SMS > Outline
● Setting for login by RLS Authentication
The procedures for changing the RLS authentication Start/ Stop settings are as follows.
1) Access the SMS login screen using the normal method (password authentication). The
URL is shown below.
URL: https://<IP address of MEAP device>:8443/sms/rls/
Ex.) https://172.16.188.240:8443/sms/rls
2) Enter the password in the password entry field, and click the [Log In] button. The default
password is "MeapSmsLogin". (Case sensitive)
Login screen by Password Authentication
F-2-270
3) Select [System Application Management] on System Management menu.
F-2-271
2-165
F-2-272
F-2-273
2-165