Service Work - Canon imageRUNNER ADVANCE C5255 Series Service Manual

2
Technology > Fixing System > Service work > When replacing parts

Service work

■ Periodically replaced parts
No parts are assigned to be replaced periodically.
■ Consumable parts
Parts Estimated life
Parts name Qty
number (print)
1 Film unit FM3-5949 1 300,000
FM3-5950
FM3-5951
2 Pressure roller FC8-4906 1 300,000
3 Fixing bearing XG9-0172 2 300,000
The parts mentioned above are in common with those of iR-ADV C5051 series.
*1: Be sure to check if nip width is appropriate after replacement.
Bearing
Film Unit (100V)
(120V)
(230V)
2 Technology > Fixing System > Service work > When replacing parts
Counter
Adjustment Remarks
(DRBL-2)
FX-UP-FR N.A. * 1 100V
120V
230V
1
FX-LW-RL N.A. *
FX-LW-BR N.A.
T-2-54
Pressure Roller
Bearing
F-2-123
■ List of periodical service works
Parts
Parts name Qty
number
1 Fixing Separation Cuide FC8-4906 1
2 Shutter Cover XG9-0172 1
■ When replacing parts
When replacing the Consumable Parts, be sure to clear the Parts Counter
(COPIER > COUNTER > PRDC-1/DRBL-1)
● Film unit, pressure roller
Check that the fixing nip width is within the specified range.
Paper to be used: A4 / LTR size (plain paper, 80 to 105 g/m
1) Set paper on the manual feed pickup tray.
2) Execute output of fixing nip paper in Service Mode:
(Lv.1) COPIER > FUNCTION > FIXING > NIP-CHK
Paper is picked up to make 2-sided print.
1 st side: solid image in Magenta, 2 nd side: no image (blank)
The paper is stopped at the nip area when fixing is performed on the 2
delivered outside the machine approx. 15 sec later.
3) Measure the nip width and check that the measured value is within the specified range.
Estimated
Remarks
life (print)
300,000 Replace the Film Unit at the same time
300,000 Replace the Film Unit at the same time
2 )
nd
side, and then
2-91
T-2-55
2-91