Brake Lever Replacement
The left fuel tank and hood have been removed for photo
purposes.
Brake Lever Removal
1. Raise the seat.
2. Disconnect the negative battery cable from the
battery terminal.
3. Lower the seat.
4. Release the parking brake (forward position).
5. Remove the cotter pin and clevis pin securing the
brake linkage yoke to the brake lever assembly (Fig.
111).
Fig 111
Z580/Z589 DFI Z Master Service Manual
6. Lift the floor pan assembly.
7. Remove the brake lever pivot shaft cotter pin (Fig.
112).
8. Slide the brake lever out of the pivot bushings (Fig.
113).
PICT-2915a
CHASSIS
Fig 112
IMG-7922a
Fig 113
PICT-2913a
3
3-31