Toro Z580 DFI Z Master Service Manual page 50

7. Insert the z-bend of the throttle cable into the throttle
arm assembly (Fig. 104).
Fig 104
8. Install the throttle cable into the cable clamp on the
engine throttle linkage (Fig. 105).
Fig 105
Z580/Z589 DFI Z Master Service Manual
9. Install the 4 screws securing the control panel to the
left hand fuel tank. Install the knob for the throttle
control assembly. Move the throttle control to the low
idle speed setting (Fig. 106).
IMG-0406a
10. Adjust the throttle linkage on the engine. Lightly
push the cable toward the Z-bend end of the cable
and tighten the cable clamp (Fig. 107).
IMG-0407a
CHASSIS
Fig 106 IMG-0408a
Fig 107 IMG-0410a
3
3-29