Toro Z580 DFI Z Master Service Manual page 205

MOWER DECKS
15. Install the spacer through the top of the spindle
housing (Fig. 603).
16. Using a press, install the upper bearing race into the
spindle housing (Fig. 604).
Note: The wider inside diameter of the bearing race
should be facing up to accept the tapered
bearing.
7
7-16
Fig 603 DSC-2688a
Fig 604 DSC-2689a
17. Turn the spindle housing over and install the lower
bearing race into the spindle housing (Fig. 605).
Note: The wider inside diameter of the bearing race
should be facing up to accept the tapered
bearing.
Fig 605
18. Pack the tapered bearing with #2 grease and install
the tapered bearing (Fig. 606).
Fig 606
Z580/Z589 DFI Z Master Service Manual
DSC-2690a
DSC-2691a