Right Hand Motion Control Assembly Installation - Toro Z580 DFI Z Master Service Manual

Right Hand Motion Control Assembly
Installation
9. Slide a side flange bearing onto each end of the right
motion control assembly (Fig. 205).
Fig 205
10. Position the right hand motion control assembly and
control shaft arm assembly into position under the
traction frame (Fig. 206).
Fig 206
Z580/Z589 DFI Z Master Service Manual
11. Position the side flange bearing to the left hand
motion control assembly and loosely install 2 bolts
and nuts to secure the side flange bearing (Fig.
207).
PICT-3092a
12. Position the side flange bearing to the inside of the
traction control frame and loosely install 2 bolts and
nuts securing the side flange bearing (Fig. 208).
PICT-3088a
CHASSIS
Fig 207 PICT-3144a
Fig 208 PICT-3084a
3
3-57