ENGINE
5
Install a cable tie around fuel pump wires and the
wiring harness (Fig. 508).
6. Turn the fuel valve to the right or left fuel tank (Fig.
5
509).
7. Install the battery negative cable to the battery.
8. Lower the seat.
5-32
Fig 508
IMG-0645a
Fig 509
IMG-0619a
Checking the Radiator Coolant
Note: Do not open the radiator cap. Doing this may
introduce air into the cooling system.
1. Position the machine on a level surface, stop the
engine, and set the parking brake.
2. Raise the seat.
3. With the engine cool, check the overflow bottle level.
The fluid needs to be up to the indicator line (bump)
on the outside of the overflow bottle (Fig. 510).
4. If the coolant level is low, add a 50/50 mix of extend-
ed life antifreeze/Dex-Cool® and water to the over-
flow bottle. Fill the overflow bottle to the indicator line
on the bottle (Fig. 510).
Fig 510
A. Coolant overflow
bottle
Z580/Z589 DFI Z Master Service Manual
A
B
A
fig. 51 G001103
B. Indicator line on side
of overflow bottle