12. Remove the cotter pin and clevis pin that secure the
neutral return yoke to the right hand motion control
assembly (Fig. 181).
Fig 181
13. Loosen the jam nut on the right hand neutral return
spring assembly. Remove the yoke from the neutral
return bolt (Fig. 182).
Fig 182
Z580/Z589 DFI Z Master Service Manual
14. Remove the 2 bolts and nuts securing the side
flange bearing to the inside of the traction frame
(Fig. 183).
PICT-3081a
15. Remove the 2 bolts and nuts securing the side
flange bearing to the left hand motion control
assembly (Fig. 184).
PICT-3087a
CHASSIS
Fig 183
PICT-3084a
Fig 184
PICT-3086a
3
3-51