Toro Z580 DFI Z Master Service Manual page 141

ENGINE
17. Remove 1 bolt, washer and nut retaining the
R-clamp to the left side strap guard (Fig. 404). Re-
move the R-clamp.
5
18. Loosen and remove the 2 bolts, washers and nuts
located on the top rib of the LH support bracket
assembly. Remove 1 bolt, washer and nut retaining
the strap guard to the frame (Fig. 405).
5-4
Fig 404 IMG-0518a
Fig 405 IMG-0519a
19. Remove the 2 bolts and nuts retaining the rear guard
assembly to the frame (Fig. 406).
Fig 406
20. Remove the rear guard assembly with the top strap,
top rib and the strap guards attached (Fig. 407).
Fig 407
Z580/Z589 DFI Z Master Service Manual
IMG-0522a
IMG-0524a