Toro Z580 DFI Z Master Service Manual page 97

HYDRAULIC SYSTEM
9. Tighten the 2 bolts securing the pump mounting
bracket to the bracket on the frame. Tighten the 2
bolts securing the mounting bracket to the pump
(Fig. 269).
4
10. Loosely install the 4 wheel motor hoses to the
bottom of the pump. Note the location of each hose
by the markings on the hose fittings and the pump
(Fig. 270).
A. RH wheel motor, rear hose fitting
B. RH wheel motor, front hose fitting
C. LH wheel motor, rear hose fitting
D. LH wheel motor, front hose fitting
4-10
Fig 269 PICT-3259a
A
B
C
D
Fig 270 PICT-3322a
11. Install the LH wheel motor hoses. Note the location
of each of the hoses by the markings on the hoses
and wheel motor fittings (Fig. 271).
Fig 271
12. Tighten the LH wheel motor hose fittings at the pump
and at the wheel motor.
13. Install the RH wheel motor hoses. Note the location
of each of the hoses by the markings on the hoses
and the wheel motor fittings (Fig. 272).
Fig 272
Z580/Z589 DFI Z Master Service Manual
PICT-3324a
PICT-3327a