Toro Z580 DFI Z Master Service Manual page 207

MOWER DECKS
23. Install the seal. Press it flush with the top of the
housing (Fig. 611).
Note: The open lip of the seal faces inward.
24. Install the bearing shield and the seal spacer onto
the spindle shaft (Fig. 612).
7
7-18
Fig 611 DSC-2696a
Fig 612 DSC-2702a
25. Lower the spindle housing over the spindle shaft
(Fig. 613).
Fig 613
26. Install the seal spacer on the top of the spindle
housing (Fig. 614).
Fig 614
Z580/Z589 DFI Z Master Service Manual
DSC-2703a
DSC-2704a