Toro Z580 DFI Z Master Service Manual page 109

HYDRAULIC SYSTEM
3. Loosely install the 2 front wheel motor mounting
bolts, short spacers and nuts (Fig. 310).
4
4. Torque the 4 wheel motor mounting bolts to 100 + 8
ft-lbs. (136 + 11 Nm) (Fig. 311).
4-22
Fig 310
PICT-3376a
Fig 311 PICT-3382a
5. Install the wheel motor fittings. Note the location
markings (Fig. 312).
Fig 312
6. Install the wheel motor hoses onto the wheel motor
fittings. Note the location markings (Fig. 313).
Fig 313
Z580/Z589 DFI Z Master Service Manual
PICT-3367a
PICT-3366a