MOWER DECKS
51. Insert the cross shaft into the gearbox. Seat the
cross shaft bearing into the closed end cap (Fig.
816).
52. Install .013" (.33mm) thickness of shims onto the
open end cap (Fig. 817).
Note: The shim color corresponds to its thickness:
Blue: .005" (.127mm) thick
Green: .003" (.076mm) thick
Brown: .010" (.254mm) thick
7
7-76
Fig 816
IMG-8558a
Fig 817
IMG-8561a
53. Install a new end cap o-ring (Fig. 818).
Fig 818
54. Apply a protective film onto the shaft keyway.
55. Install the open end cap assembly over the cross
shaft and onto the gearbox (Fig. 819).
Fig 819
Z580/Z589 DFI Z Master Service Manual
IMG-8562a
IMG-8559a