14. Tighten the RH wheel motor hose fittings at the
pump and at the wheel motor.
15. With the hose clamp on the oil cooler hose, slide the
hose onto the pump fitting (Fig. 273).
Fig 273
16. Position the hose clamp over the hose and fitting
barb (Fig. 274).
Fig 274
Z580/Z589 DFI Z Master Service Manual
HYDRAULIC SYSTEM
17. Slide a hose clamp over the hydraulic suction hose
(Fig. 275).
PICT-3331a
18. Slide the hydraulic suction hose onto the pump fitting
on top of the hydrostatic pump (Fig. 276).
PICT-3211a
Fig 275
PICT-3333a
Fig 276
PICT-3203a
4
4-11