Toro Z580 DFI Z Master Service Manual page 74

20. Disconnect the harness from the neutral switch
located under the traction frame assembly.
Note: Access the switch from under the seat area.
21. Remove the bolt, washer and nut that secure the left
hand control rod assembly to the left hand motion
control assembly (Fig. 189).
Fig 189
22. Remove the cotter pin and clevis pin that secure the
neutral return yoke to the left hand motion control
assembly (Fig. 190).
Fig 190
Z580/Z589 DFI Z Master Service Manual
23. Loosen the left hand neutral return assembly jam
nut. Remove the yoke from the neutral return bolt
(Fig. 191).
24. Remove the nut, bolt and washer securing the left
hand control rod ball joint to the hydrostatic pump
PICT-3109a
control arm (Fig. 192).
PICT-3124a
CHASSIS
Fig 191 PICT-3126a
Fig 192 PICT-3131a
3
3-53