Toro Z580 DFI Z Master Service Manual page 196

3. Slide a wood block under each corner of the mower
deck.
4. Push the deck lift handle to the lowest height-of-cut
position to overcome the tension of the lift assist
springs. Insert the hitch pin above the deck lift
handle to lock the handle in the down position (Fig.
568).
Fig 568
5. Insert the deck chain assembly bolt into the chain
brackets on the mower deck. The front chain bolts
are installed in the bottom of the bracket slot and the
rear chain bolts are installed in the top of the bracket
slot. Install a nut onto each of the chain bolts (Fig.
569).
Fig 569
Z580/Z589 DFI Z Master Service Manual
6. Place the mower deck in the transport position.
Remove the wood blocks from under each corner of
the mower deck.
7. Align each strut with the mower deck strut brackets
and install the strut pins (Fig. 570).
PICT-4021a
8. Install a bolt and nut to secure each strut pin to the
mower deck (Fig. 571).
PICT-4023a
MOWER DECKS
Fig 570
Fig 571
PICT-4038a
7
PICT-4036a
7-7