Cross Shaft Teardown
23. Place the cross shaft in a press with the pinion gear
bearing facing up.
24. Press the pinion gear and bearing off the cross shaft
(Fig. 791).
Fig 791
25. Remove the key from the shaft keyway (Fig. 792).
Fig 792
Z580/Z589 DFI Z Master Service Manual
26. Position the cross shaft in the press so the opposite
bearing is facing up. Press the bearing off the shaft
(Fig. 793).
IMG-8517a
IMG-8519a
MOWER DECKS
Fig 793
IMG-8520a
7
7-69