Motion Control Damper Installation - Toro Z580 DFI Z Master Service Manual

CHASSIS

Motion Control Damper Installation

1. Raise the seat.
2. Position the damper assembly with the rod end
down (Fig. 230).
3
3. Insert the upper damper bolt into the motion control
assembly arm. Install a nut to secure the upper end
of the damper (Fig. 231).
3-64
Fig 230 PICT-3178a
Fig 231 PICT-3173a
4. Insert the lower damper bolt into the frame and
install a nut to secure the lower end of the damper
(Fig. 232).
Fig 232
5. Install the negative battery cable to the battery.
6. Lower the seat.
Z580/Z589 DFI Z Master Service Manual
PICT-3171