Toro Z580 DFI Z Master Service Manual page 165

ENGINE
3. Install the 4 bolts, washers and nuts retaining the
fan assembly to the bottom radiator plate (Fig. 494).
Tighten the bolts and nuts.
5
4. Install the rear guard assembly to the unit (Fig. 495).
5-28
Fig 494 IMG-0497a
Fig 495 IMG-0503a
5. Install 2 bolts, washers, and nuts on the top of
the rear guard and the bottom radiator plate and
then install 4 bolts, washer and nuts through the 4
guard straps and rear guard. Install 2 bolts and nuts
through the bottom of the rear guard and the frame
(Fig. 496).
Fig 496
Z580/Z589 DFI Z Master Service Manual
IMG-0491a