Toro Z580 DFI Z Master Service Manual page 151

ENGINE
20. Connect the hydraulic pump idler spring to the pin on
the idler arm, using a spring tool (Fig. 444).
21. Install the electric PTO clutch. Refer to "Electric PTO
5
Clutch Installation" on page 7-36.
22. Install the rear guard assembly with the top strap, rib
top, and the guards attached (Fig. 445).
5-14
Fig 444 IMG-0595a
Fig 445 IMG-0524a
23. Install the 2 bolts and nuts retaining the bottom of
the rear guard assembly to the frame (Fig. 446).
Fig 446
24. Install 2 bolts through the LH support bracket
through the top strap and to the bracket for the
relays. Install a nut and tighten (Fig. 447).
Fig 447
Z580/Z589 DFI Z Master Service Manual
IMG-0522a
IMG-0602a