Cross Shaft Rebuild - Toro Z580 DFI Z Master Service Manual

MOWER DECKS

Cross Shaft Rebuild

33. Place the cross shaft in the press and press a new
bearing onto the shaft (Fig. 800).
34. Install the key into the shaft keyway (Fig. 801).
7
7-72
Fig 800
IMG-8525a
Fig 801 IMG-8519a
35. Place the cross shaft in a press with the installed
bearing down.
36. Align the keyway in the pinion gear with the key
installed in the shaft. Press the pinion gear onto the
shaft (Fig. 802).
Fig 802
37. Press the bearing onto the shaft (Fig. 803).
Fig 803
Z580/Z589 DFI Z Master Service Manual
IMG-8529a
IMG-8530a