Parking Brake Lever Assembly Replacement - Toro TurfMaster HDX 22215 Service Manual

Brake Cable Installation (continued)

Parking Brake Lever Assembly Replacement

Parking Brake Lever Assembly Removal
30 Inch TurfMaster® HDX WPM
3432-730 Rev A
g298346
8. Install zip ties securing the cable to the handle assembly.
1. Park the machine on a level surface. Stop the engine and wait for all moving
parts to stop. Shut the fuel off.
2. Remove the grass bagger assembly if attached.
3. Remove the 1/4–20 inch nylock nut to 1/4–20 inch carriage bolt securing the
parking brake assembly to the handle.
g298358
4. Remove the 5/16–18 inch nylock nut to 5/16–18 inch carriage bolt securing
the parking brake assembly to the handle.
Figure 108
Figure 109
Page 5–41 Controls: Service and Repairs