Toro Z580 DFI Z Master Service Manual page 256

16. Using a gear puller, remove the cross shaft gear
from the pinion shaft (Fig. 784).
Fig 784
17. Remove the key from the shaft keyway (Fig. 785).
Fig 785
Z580/Z589 DFI Z Master Service Manual
18. Place the pinion shaft assembly in a press, shaft
side down. Press the pinion shaft assembly out of
the pinion housing (Fig. 786).
IMG-8499
19. Remove the bearing and shaft assembly from the
pinion housing (Fig. 787).
IMG-8501
MOWER DECKS
Fig 786
Fig 787
IMG-8503
7
IMG-8504
7-67