Toro Z580 DFI Z Master Service Manual page 257

MOWER DECKS
20. Remove the grease seal from the shaft (Fig. 788).
21. Place the shaft assembly in a press and press the
bearing off the shaft (Fig. 789).
7
7-68
Fig 788 IMG-8507a
Fig 789 IMG-8509a
22. Place the pinion housing in a vise and remove the
inner and outer bearing races from the housing (Fig.
790).
Note: The inner race and housing must be heated to
remove the races.
Fig 790
Z580/Z589 DFI Z Master Service Manual
IMG-8514a