Toro Z580 DFI Z Master Service Manual page 34

7. Tighten the 3 nuts until three threads protrude past
the nut. Do not over-tighten (Fig. 046).
Fig 046
8. Tighten the bolt located in the front corner of the
tank to frame (Fig. 047).
Fig 047
Z580/Z589 DFI Z Master Service Manual
9. Install the right rear wheel assembly (Fig. 048).
PICT-3290a
10. Install the negative battery cable.
11. Install the front engine shield (Fig. 049).
IMG-0310a
CHASSIS
Fig 048 IMG-0307a
Fig 049 IMG-0303a
3
3-13