ENGINE
4. Plug the orange and wire plug that goes to the
voltage regulator (Fig. 428).
5. Install the 3 red wire terminals on the starter
5
solenoid stud with a washer and nut (Fig. 429).
5-10
Fig 428
IMG-0554a
Fig 429
IMG-0574a
6. Install the plug connector to the starter solenoid (Fig.
430).
Fig 430
7. Install a cable tie around the wires going to the
starter solenoid (Fig. 431).
Fig 431
Z580/Z589 DFI Z Master Service Manual
IMG-0575a
IMG-0579a