7. Remove the belt from around the adjustment plate
pulley.
8. Remove the nut from the pivot bolt (Fig. 751).
Note: The pivot bolt will fall through to the under-
side of the deck when the nut is removed.
Fig 751
9. Remove the nut and washer from the adjustment
plate slot bolt (Fig. 752).
Fig 752
Z580/Z589 DFI Z Master Service Manual
MOWER DECKS
10. Remove the tension adjustment plate assembly (Fig.
753).
11. Remove the 2 spacers from the mower deck (Fig.
754).
6666a
6667a
Fig 753
PICT-6668a
Fig 754
6669a
7
7-57