Right Hand Motion Control Assembly Removal - Toro Z580 DFI Z Master Service Manual

CHASSIS
Right Hand Motion Control Assembly
Removal
8. Remove the 2 bolts and washers securing the right
lever to the control shaft arm. Remove the right lever
(Fig. 177).
3
9. Remove the outside nut from the bolt that secures
the motion control damper to the right hand motion
control assembly (Fig. 178).
3-50
Fig 177 PICT-3064a
Fig 178 PICT-3066a
10. Disconnect the harness from the neutral switch
located under the right side of the traction frame
assembly (Fig. 179).
Fig 179
11. Remove the bolt, washer and nut that secure the
right hand control rod assembly to the right hand
motion control assembly (Fig. 180).
Fig 180
Z580/Z589 DFI Z Master Service Manual
PICT-3075a
PICT-3079a