Strut Replacement; Strut Removal - Toro Z580 DFI Z Master Service Manual

MOWER DECKS

Strut Replacement

Note: The right rear wheel assembly has been
removed for photo purposes.

Strut Removal

1. Park the machine on a level surface, disengage the
PTO, turn the ignition off and remove the key.
2. Raise the seat.
3. Remove the negative battery cable from the battery.
4. Raise the floor pan assembly (Fig. 727).
7
7-50
Fig 727 PICT-4011a
5. Remove the left and right mower deck belt covers
(Fig. 728).
Fig 728
6. Using a spring tool (Toro p/n: 92-5771), remove the
mower deck idler spring. Remove the mower deck
belt from the gearbox deck drive pulley (Fig. 729).
Fig 729
Z580/Z589 DFI Z Master Service Manual
PICT-4012a
PICT-4013a