Toro Z580 DFI Z Master Service Manual page 39

CHASSIS
3. Slide the hose clamp onto the fuel intake hose.
Install the fuel intake hose onto the fuel-fitting barb
located on the underside of the fuel tank. Slide the
hose clamp into position and tighten (Fig. 066).
3
4. Install a bolt, lock washer, and washer into the right
front corner of the fuel tank securing it to the frame
(Fig. 067).
3-18
Fig 066 IMG-0338a
Fig 067 IMG-0350a
5. Loosely install a washer, spring and nut onto each
of the three studs on the underside of the fuel tank
(Fig. 068).
A
C
C
Fig 068
A. Fuel tank
B. Frame
6. Tighten the nuts until three threads protrude past the
nut. Do not over-tighten (Fig. 069).
Fig 069
Z580/Z589 DFI Z Master Service Manual
B
C
lh fuel tank fasteners
C. Mounting stud fastener
assembly (3)
PICT-3290