Toro Z580 DFI Z Master Service Manual page 208

27. Install bearing shield (Fig. 615).
Fig 615
28. Install the square key onto the spindle shaft (Fig.
616).
Fig 616
Z580/Z589 DFI Z Master Service Manual
29. Install the pulley hub on the spindle shaft (Fig. 617).
DSC-2705a
30. Install the heavy washer and nut on the top of the
spindle shaft (Fig. 618).
Note: The cup side of the washer should be facing
down toward the pulley hub.
DSC-2706a
MOWER DECKS
Fig 617
Fig 618
DSC-2707a
7
DSC-2708a
7-19