Left Hand Motion Control Assembly Removal - Toro Z580 DFI Z Master Service Manual

CHASSIS
16. Remove the right hand motion control assembly and
right hand control shaft arm assembly (Fig. 185).
3
17. Inspect the side flange bearings. Replace if worn or
damaged (Fig. 186).
A
A. Side flange bearing (2)
B. Control shaft arm
C. Right hand motion control assembly
D. Neutral switch
3-52
Fig 185 PICT-3088a
B
C
D
Fig 186 PICT-3091a
Left Hand Motion Control Assembly
Removal
18. Remove the 2 bolts, and washers securing the left
lever to the control shaft arm. Remove the left lever
(Fig. 187).
19. Raise the seat and remove the outside nut from the
bolt that secures the motion control damper to the
left hand motion control assembly (Fig. 188).
A
Z580/Z589 DFI Z Master Service Manual
Fig 187 PICT-3098a
Fig 188 PICT-3102a