Toro Z580 DFI Z Master Service Manual page 118

16. Tighten the jam nuts at the ball joints (Fig. 332).
Fig 332
17. After both pump neutrals are set, shut off the
machine.
18. Remove the jumper wire from the wire harness ter-
minals and plug the terminals into the seat switch
(Fig. 333).
Fig 333
19. Install the seat rod and lower the seat into position.
20. Lower the machine.
Z580/Z589 DFI Z Master Service Manual
HYDRAULIC SYSTEM
PICT-3486a
PICT-3491a
4
4-31