Brake Module Replacement
Brake Module Removal
Electrical System: Service and Repairs
1. Park the machine on a level surface and set the parking brake. Stop the
engine, wait for all moving parts to stop and remove the key.
2. Flip the seat forward.
3. Disconnect the battery by removing the negative battery cable first, then
the positive cable from the battery.
4. Depress the tab on the top of the connector to release the connector from
the module.
g302093
5. Remove the 2 (3/8) screws securing the brake module bracket to the chassis.
Remove the brake module.
6. Remove the 4 Philips head screws securing the bracket to the brake module.
g302094
Figure 280
Figure 281
Page 8–12
TIMECUTTER® Service Manual
3433-938 Rev A