CHASSIS
3. Position the hose clamp and tighten (Fig. 042).
3
4. Slide a hose clamp onto the intake fuel line. Slide
the intake fuel line onto the fitting located on the
bottom of the fuel tank. Position the hose clamp and
tighten (Fig. 043).
3-12
Fig 042
IMG-0320a
Fig 043
IMG-0321a
5. Loosely install a bolt, lock washer, and washer
through the frame and into the front left corner of the
fuel tank (Fig. 044).
Fig 044
6. Loosely install a washer, spring and nut onto each
of the three studs on the underside of the fuel tank
(Fig. 045).
B
C
C
Fig 045
Z580/Z589 DFI Z Master Service Manual
IMG-0310a
A
B
C
RH fuel tank fasteners a