MOWER DECKS
5. Position the tension adjustment plate assembly onto
the mower deck making sure the spacers are in
place (Fig. 762).
6. Insert 2 bolts up through the mower deck, spacers
and tension adjustment plate. Install a washer and
nut onto each bolt (Fig. 763).
7
7-60
Fig 762
PICT-6668a
Fig 763
6667a
7. Route the belt around the adjustment plate pulley.
Refer to the belt routing decal (Fig. 764).
Fig 764
8. Install the mower deck idler spring (Fig. 765).
Fig 765
Z580/Z589 DFI Z Master Service Manual
fig. 108-5981
PICT-4013a