Front Crossmember Support Plate - Subaru S209 2019 Service Manual

3. Front Crossmember Support Plate

A: REMOVAL
1) Lift up the vehicle.
2) Remove the under cover - front.
3) Remove the front support.
4) Remove the flexible draw stiffener - front.
5) Remove the bolt, and remove the front crossmember support, support crossmember front and the support
arm front.
B: INSTALLATION
CAUTION:
• For parts which are not reusable, always use new parts.
• Install the under cover - front so that the front end of the under cover (b) comes inside the bumper
face - front (a).
(a)
1) Install the front crossmember support, support crossmember front and the support arm front.
Tightening torque:
60 N·m (6.1 kgf-m, 44.3 ft-lb)
2) Install the flexible draw stiffener - front.
Tightening torque:
60 N·m (6.1 kgf-m, 44.3 ft-lb)
3) Install the front support.
Tightening torque:
100 N·m (10.2 kgf-m, 73.8 ft-lb)
4) Install the under cover - front.
Front Crossmember Support Plate
AA-13011
(b)
FS-17
FRONT SUSPENSION
(a)
(b)
EI-04291