Subaru S209 2019 Service Manual page 267

B: INSTALLATION
1. FRONT FENDER AIR OUTLET
1) Clean and degrease the front fender air outlet attachment area on the front fender.
NOTE:
• When the ambient temperature is 15°C (59°F) or less, heat the entire part of double-sided tape and the at-
tachment area to approx. between 25°C and 40°C (77°F and 104°F) using a heat light, etc.
• Heating a particular small area will cause deformation of the parts.
2) Install the front fender air outlet.
(1) Peel off the backing sheet (a) on the front fender air outlet inner.
(a)
(2) Attach the front fender air outlet inner (a) while aligning it to the cutout position (b).
(3) Press-fit the front fender air outlet inner.
Front Fender
(a)
(a)
(a)
(b)
EB-3
EXTERIOR BODY PANELS
(a)
(a)
AA-10127
(a) (b)
AA-10118