REAR SUSPENSION
5. Rear Shock Absorber
A: REMOVAL
1) Disconnect the ground terminal from battery.
2) Lift up the vehicle, and then remove the rear wheels.
3) Remove the sensor assembly - headlight beam leveler.
4) Remove the bolts and nuts, and lower the lateral link assembly - rear.
(1) Remove the nut and disconnect the rear stabilizer link.
(2) Remove the bolts from the lower side of rear shock absorber assembly.
(3) Disconnect the rear axle housing from the lateral link assembly - rear.
5) Take out the mat - trunk.
6) Tilt the rear seat backrest forward.
7) Remove the clips, and turn over the trim panel - trunk side.
Rear Shock Absorber
(2)
(3)
RS-18
(1)
RS-00402
RS-00409