Intercooler Water Spray Relay - Subaru S209 2019 Service Manual

13.Intercooler Water Spray Re-
lay
A: REMOVAL
1) Disconnect the ground terminal from battery.
2) Open the trunk, and remove the mat - trunk.
3) Remove the sub trunk.
CAUTION:
Remove any luggage, etc. stored in the trunk
room to outside of the vehicle, and then re-
move/install the sub trunk while holding its
center area with both hands. Holding the corner
part (a) with something stored inside may dam-
age the sub trunk.
(a)
4) Remove the intercooler water spray relay from
the BRKT UPR TANK.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
1) Check that the intercooler water spray relay has
no deformation, cracks or other damages.

Intercooler Water Spray Relay

(a)
AA-14003
AA-14027
IN-35
2) Measure the resistance between intercooler wa-
ter spray relay terminals.
(1)
(2)
(2)
(3)
(3)
(4)
3 4
Terminal No.
1 and 2
3 and 4
INTAKE (INDUCTION)
(1)
(4)
1
2
IN-02836
Standard
1 M or more
128.07 — 156.53  (when
20°C (68°F))