Subaru S209 2019 Service Manual page 167

3) Install the pad - disc brake front.
NOTE:
Install the parts with the pad wear indicator facing upward.
(a)
(c)
(a) Pad - disc brake front outer
(b) Pad - disc brake front inner
(c) Pad wear indicator
4) Install the pad clip bolt.
Tightening torque:
30 N·m (3.1 kgf-m, 22.1 ft-lb)
5) Install the cross spring.
6) Install the pin - disc brake.
7) Install the front wheels.
Tightening torque:
120 N·m (12.2 kgf-m, 88.5 ft-lb)
C: INSPECTION
1) Check the thickness (A) of the pad - disc brake front.
NOTE:
• Always replace the pads of both wheels and both sides as a set.
• Replace pad clips if they are twisted or worn.
• Replace the pad if there is oil or grease on it.
Front Brake Pad
(b)
AA-13041
BR-7
BRAKE