EXTERIOR/INTERIOR TRIM
3. Front Bumper
A: REMOVAL
1. FRONT UNDER SPOILER
NOTE:
Perform the procedures for the right side in the same way as for the left side.
1) Remove the front under spoiler.
(1) Remove the bolts (c) and washers (d) securing the front under spoiler (b) from the bumper face - front
(a).
(a)
(2) Remove the clips (a), (b) and (c), and then remove the front under spoiler (d).
(a)
B: INSTALLATION
1. FRONT UNDER SPOILER
Install the front under spoiler in the reverse order of removal.
Tightening torque:
1.0 N·m (0.1 kgf-m, 0.7 ft-lb)
Front Bumper
(b)
(d)
(c)
(b)
EI-14
AA-10038
(c)
(d)
AA-10039