Subaru S209 2019 Service Manual page 59

26) Prepare a container, and disconnect the intercooler water spray side hose assembly to drain water in the
intercooler water spray side hose assembly.
27) Tie a string to the front fender side of the intercooler water spray side hose assembly, and pull it out to
the passenger room side.
NOTE:
Leave the string in the front fender or the passenger room, and use it during installation.
28) After completely pulling out the intercooler water spray side hose assembly, remove the string tied to the
intercooler water spray side hose assembly in step 27).
29) Remove the intercooler water spray side hose assembly from the vehicle.
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
• Install the intercooler water spray hose using a new tie-wrap.
• When installing a new intercooler water spray duct hose
contained in the repair parts by cutting it to the following length.
• Intercooler water spray duct hose
• Intercooler water spray duct hose
• NOZZLE HOSE: 30 mm (1.18 in): 2
• When installing a new intercooler water spray duct hose
parts by cutting it at 60 mm (2.36 in) from the JOINT Y section, and install the VALVE F.
Intercooler Water Spray Hose
: 230 mm (9.06 in): 1
: 380 mm (14.96 in): 1
IN-29
, and NOZZLE HOSE, use the HOSE930
, use the HOSE ASSY contained in the repair
INTAKE (INDUCTION)
AA-14020