REAR SUSPENSION
(2) Temporarily tighten the bolts at 2 locations on the inner side (rear side) of the vehicle.
(3) Tighten at 4 locations equally, a little at a time, to apply the torque evenly.
Tightening torque:
5 N·m (0.5 kgf-m, 3.7 ft-lb)
(4) Further tighten all the bolts.
Tightening torque:
3 N·m (0.3 kgf-m, 2.2 ft-lb)
8) Connect the connector of the rear antenna assembly - interior.
9) Install the trim panel - trunk side.
10) Install the trim panel - trunk rear.
11) Install the mat - trunk.
12) Return the rear seat backrest to the lock position.
13) Connect the battery ground terminal.
C: ADJUSTMENT
CAUTION:
Be careful not to damage the boot of the link ball.
1) Loosen the lock nut (a).
2) Rotate the rod (b) to adjust until the adjustment scale position (A) becomes 4.5 — 5 mm (0.177 — 0.197
in).
Rear Flexible Draw Stiffener
(a)
AA-13030
RS-26
AA-13048