Subaru S209 2019 Service Manual page 249

Tightening torque:
0.35 N·m (0.04 kgf-m, 0.26 ft-lb)
(9) Apply NOX-RUST (7703WJ) or equivalent to the peripheral area of nut installation (a) shown in the fig-
ure.
(10) If the NOX-RUST (7703WJ) or equivalent is spilled, wipe it off and clean the area.
(11) Install the spoiler assembly - side.
(12) Install the mud guard - rear.
(13) Install the bumper face - rear.
(14) Install the rear tires.
(15) Connect the battery ground terminal.
4. REAR DOOR GARNISH
NOTE:
Install the rear door garnish with the rear quarter garnish installed to the vehicle.
1) Clean and degrease the rear door garnish attachment area on the rear door panel.
NOTE:
• When the ambient temperature is 15°C (59°F) or less, heat the entire part of double-sided tape and the at-
tachment area to approx. between 25°C and 40°C (77°F and 104°F) using a heat light, etc.
Side Garnish & Side Spoiler
(a)
(a)
(b)
(b)
EI-61
EXTERIOR/INTERIOR TRIM
(a)
(b)
AA-10059
(a)
AA-10060